The other day I was working on a particularly difficult electronics problem with an ion gun controller and to help figure it out, I needed to dust off my trusty Huntron Tracker. I don’t need to use it very often, but when needed, there is nothing better for troubleshooting electronics problems.
First introduced in 1979, the Huntron Tracker displays an analog signature, which is a combination of resistive, capacitive, inductive, and semi-conductive characteristics. This visual display is very helpful for comparing electronics components on a defective board. The Tracker is particularly useful for comparing components on a known defective electronics board with a known good one. The Tracker applies a tiny AC voltage to the probes so you can test components with no power applied to the board that you are testing.
You can usually find defective electronics components with a DVM (digital volt meter) by testing diodes and capacitors, then measuring resistance values. But there are times when all of the individual components check out as OK with a DVM, but you know that there must be at least one defective component because the board does not work properly. For those times, the Huntron Tracker works like a champ every time. By finding some components that read differently with the Tracker, you can get a clue and ultimately, find the problem.
The early model Huntron Trackers had a little CRT display and three power level settings. Those models are still available on EBay for about $300.00. The Tracker that I use is one of these early ones and it still works well.
Over the years Huntron Trackers have evolved and today’s models include more power settings, automated testing, and software. For more info visit Huntron at –
If a new Huntron Tracker is out of your price range or you can’t find an older one, there are also inexpensive curve tracer kits available on eBay that provide Tracker functionality using an oscilloscope. To find those, go to eBay and search for Curve Tracer kit.