RBD Instruments<\/a> for assistance.<\/p>\n\n\n\n<\/p>\n\n\n\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
Procedure to test the filament current on an 11-065 ion gun controller when it is connected to the 04-303 ion gun. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":3774,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"Procedure to test the filament current on an 11-065 ion gun controller when it is connected to the 04-303 ion gun.","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[161],"tags":[428,427],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2023\/07\/20230707_082047_resized.jpg?fit=1512%2C1512&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-YN","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":2353,"url":"https:\/\/www.rbdinstruments.com\/blog\/11-065-ion-gun-control-no-high-voltage\/","url_meta":{"origin":3769,"position":0},"title":"11-065 Ion Gun Control no high voltage","author":"Randy","date":"July 4, 2018","format":false,"excerpt":"Over the years I have seen this problem a few times and thought that it would be worth mentioning. The symptom is that there is no high voltage on the 11-065 ion gun control HV1 board, or the voltage is low. On the system, the symptom will\u00a0 be no or\u2026","rel":"","context":"In "Ion Sources"","block_context":{"text":"Ion Sources","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/ion-sources\/"},"img":{"alt_text":"C5 location on the HV1 board in an 11-065","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2018\/07\/C5-location-on-the-HV1-board-in-an-11-065.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2018\/07\/C5-location-on-the-HV1-board-in-an-11-065.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2018\/07\/C5-location-on-the-HV1-board-in-an-11-065.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1823,"url":"https:\/\/www.rbdinstruments.com\/blog\/longer-lifetime-ionizer\/","url_meta":{"origin":3769,"position":1},"title":"Longer lifetime ionizer","author":"Randy","date":"October 10, 2016","format":false,"excerpt":"Longer lifetime ionizer for the 04-303 and 06-350 ion source. As many of you know, RBD Instruments\u2019 04-303 and 06-350 ionizer rebuilds last for an average of 1100 hours of run time. Depending on how much sputtering you do, that can translate into anywhere from 2 months to 3 years\u2026","rel":"","context":"In "Ion Sources"","block_context":{"text":"Ion Sources","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/ion-sources\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":2617,"url":"https:\/\/www.rbdinstruments.com\/blog\/11-065-high-voltage-arcing-problem-and-solution\/","url_meta":{"origin":3769,"position":2},"title":"11-065 High Voltage Arcing problem and solution and SPX-314 opto-coupler replacement","author":"Randy","date":"September 15, 2019","format":false,"excerpt":"As the 11-065s get older we are starting to see instances where the beam voltage, condenser voltage or objective voltage becomes unstable as the front panel potentiometers are adjusted. The front panel potentiometers can become \u201cnoisy\u201d as a result of oxidation on the internal contacts. \u00a0In addition to causing instability\u2026","rel":"","context":"In "Ion Sources"","block_context":{"text":"Ion Sources","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/ion-sources\/"},"img":{"alt_text":"SPX314-on-HV2-board","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/09\/SPX314-on-HV2-board.jpg?fit=756%2C756&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/09\/SPX314-on-HV2-board.jpg?fit=756%2C756&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/09\/SPX314-on-HV2-board.jpg?fit=756%2C756&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":3769,"position":3},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":1223,"url":"https:\/\/www.rbdinstruments.com\/blog\/11-065-28-volt-supply-check\/","url_meta":{"origin":3769,"position":4},"title":"11-065 28 Volt supply Check","author":"Randy","date":"September 16, 2014","format":false,"excerpt":"The 28 V DC power supply in the PHI 11-065 ion gun control can become weak and cause symptoms such as low emission current. To test the supply, measure the voltage from the red wire to chassis ground. It should be 28 volts to 29 volts DC, with less than\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"28-volt-supply-test-point","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/09\/28-volt-supply-test-point.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/09\/28-volt-supply-test-point.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/09\/28-volt-supply-test-point.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":231,"url":"https:\/\/www.rbdinstruments.com\/blog\/how-to-align-the-04-303-ion-gun\/","url_meta":{"origin":3769,"position":5},"title":"How to align the 04-303 ion gun","author":"Randy","date":"November 29, 2012","format":false,"excerpt":"This post explains how to align the Physical Electronics 04-303 ion gun typically found on PHI Auger electron spectroscopy and X-ray photoelectron spectroscopy systems. The alignment principles explained here will apply to just about any surface analysis ion source. First, here is a video that explains all of the alignment\u2026","rel":"","context":"In "Ion Sources"","block_context":{"text":"Ion Sources","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/ion-sources\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/3769"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=3769"}],"version-history":[{"count":2,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/3769\/revisions"}],"predecessor-version":[{"id":3783,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/3769\/revisions\/3783"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/3774"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=3769"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=3769"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=3769"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"\"](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2023\/07\/20230707_081937_resized.jpg?ssl=1\")