\u00a0\u00a0 Update 5-8-2020 <\/p>\n\n\n\n
You can also purchase the LED lamps from www.jkllamps.com<\/a> For example PN LE-0509-01W is the white one. Search for Wedge Base LED. <\/p>\n\n\n\nThe EMO box (Emergency OFF) used on many PHI systems has switches that can become noisy, stick or fail to operate at all. These switches are used to turn on and off the card rack power, main electronics console power, vacuum console power, bakeout power and to turn off and reset all power. <\/p>\n\n\n\nAnother very common issue is that the light bulbs in the switches tend to burn out on a yearly basis. This blog post will describe where to get replacement parts for the EMO boxes.<\/p>\n\n\n\nThe round red EMO button switch is still available but the original square push button switches that were produced by Cutler-Hammer (now Eaton) are very difficult to find. Honeywell equivalents are listed below. <\/p>\n\n\n\nThere are two styles of EMO boxes. The 32-005 style has a Bakeout switch and the other style has a Vacuum Console power switch.<\/p>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\nEquivalent replacement switches produced by Honeywell are listed below.<\/p>\n\n\n\n<\/noscript>EMO box switch<\/figcaption><\/figure>\n\n\n\n EMO button <\/a> <\/td> McMaster-Carr PN 7403K42 <\/td><\/tr> Main Power ON\/Reset<\/a> <\/td>Honeywell PN #:<\/strong> AML21CBA3ACAllied Electronics Stock #:<\/strong> 70119090 <\/td><\/tr> Main Power \/ OFF <\/a> <\/td> Honeywell PN #:<\/strong> AML21CBA3AC Allied Electronics<\/strong> Stock #:<\/strong> 70119090 <\/td><\/tr> Electronics Console Power <\/a> <\/td>Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Vacuum Console Power <\/a> <\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Card rack power <\/a><\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Bake Out Power <\/a><\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr><\/tbody><\/table>\n\n\n\nOriginal lamp \u2013<\/p>\n\n\n\n<\/noscript>T1 3\/4 Wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp;\nIncandescent; T-1 3\/4; Sub-Mini Wedge; 28V; 40mA; 0.3MSCP; 7000 Hrs <\/p>\n\n\n\nManufacturer\n#: 85 <\/p>\n\n\n\nAllied\nStock #: 70013004 <\/p>\n\n\n\nRecommended LED replacement lamp \u2013<\/strong><\/p>\n\n\n\n<\/noscript>T1 3\/4 LED wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp; LED; T-1 3\/4; Sub-Mini Wedge; White; 28V; 40mA; 0.3MSCP; Lamp life 30,000 hours.<\/p>\n\n\n\nManufacturer #: LED-24-T1.75 WEDGE-W Allied Stock #:<\/strong> 70012994 <\/p>\n\n\n\nThese LED lamps are more expensive but will last for almost 4 years compared to about 1 year for the regular tungsten lamps.<\/p>\n\n\n\n Mouser PN 560-LE-0509-01W is a white LED that would work for all of the switches and it costs less. Made by JKL Components https:\/\/www.mouser.com\/datasheet\/2\/208\/LE-0509-01-21680.pdf<\/a><\/p>\n\n\n\n<\/p>\n\n\n\nBonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
The EMO box (Emergency OFF) used on many PHI systems has switches that can become noisy, stick or fail to operate at all. These switches are used to turn on and off the card rack power, main electronics console power, vacuum console power, bakeout power and to turn off and reset all power. <\/p>\n\n\n\n
Another very common issue is that the light bulbs in the switches tend to burn out on a yearly basis. This blog post will describe where to get replacement parts for the EMO boxes.<\/p>\n\n\n\n
The round red EMO button switch is still available but the original square push button switches that were produced by Cutler-Hammer (now Eaton) are very difficult to find. Honeywell equivalents are listed below. <\/p>\n\n\n\n
There are two styles of EMO boxes. The 32-005 style has a Bakeout switch and the other style has a Vacuum Console power switch.<\/p>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\nEquivalent replacement switches produced by Honeywell are listed below.<\/p>\n\n\n\n<\/noscript>EMO box switch<\/figcaption><\/figure>\n\n\n\n EMO button <\/a> <\/td> McMaster-Carr PN 7403K42 <\/td><\/tr> Main Power ON\/Reset<\/a> <\/td>Honeywell PN #:<\/strong> AML21CBA3ACAllied Electronics Stock #:<\/strong> 70119090 <\/td><\/tr> Main Power \/ OFF <\/a> <\/td> Honeywell PN #:<\/strong> AML21CBA3AC Allied Electronics<\/strong> Stock #:<\/strong> 70119090 <\/td><\/tr> Electronics Console Power <\/a> <\/td>Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Vacuum Console Power <\/a> <\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Card rack power <\/a><\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Bake Out Power <\/a><\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr><\/tbody><\/table>\n\n\n\nOriginal lamp \u2013<\/p>\n\n\n\n<\/noscript>T1 3\/4 Wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp;\nIncandescent; T-1 3\/4; Sub-Mini Wedge; 28V; 40mA; 0.3MSCP; 7000 Hrs <\/p>\n\n\n\nManufacturer\n#: 85 <\/p>\n\n\n\nAllied\nStock #: 70013004 <\/p>\n\n\n\nRecommended LED replacement lamp \u2013<\/strong><\/p>\n\n\n\n<\/noscript>T1 3\/4 LED wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp; LED; T-1 3\/4; Sub-Mini Wedge; White; 28V; 40mA; 0.3MSCP; Lamp life 30,000 hours.<\/p>\n\n\n\nManufacturer #: LED-24-T1.75 WEDGE-W Allied Stock #:<\/strong> 70012994 <\/p>\n\n\n\nThese LED lamps are more expensive but will last for almost 4 years compared to about 1 year for the regular tungsten lamps.<\/p>\n\n\n\n Mouser PN 560-LE-0509-01W is a white LED that would work for all of the switches and it costs less. Made by JKL Components https:\/\/www.mouser.com\/datasheet\/2\/208\/LE-0509-01-21680.pdf<\/a><\/p>\n\n\n\n<\/p>\n\n\n\nBonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Equivalent replacement switches produced by Honeywell are listed below.<\/p>\n\n\n\n<\/noscript>EMO box switch<\/figcaption><\/figure>\n\n\n\n EMO button <\/a> <\/td> McMaster-Carr PN 7403K42 <\/td><\/tr> Main Power ON\/Reset<\/a> <\/td>Honeywell PN #:<\/strong> AML21CBA3ACAllied Electronics Stock #:<\/strong> 70119090 <\/td><\/tr> Main Power \/ OFF <\/a> <\/td> Honeywell PN #:<\/strong> AML21CBA3AC Allied Electronics<\/strong> Stock #:<\/strong> 70119090 <\/td><\/tr> Electronics Console Power <\/a> <\/td>Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Vacuum Console Power <\/a> <\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Card rack power <\/a><\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr> Bake Out Power <\/a><\/td> Honeywell PN #:<\/strong> AML21CBE2AD Allied Electronics<\/strong> Stock #:<\/strong> 70119866 <\/td><\/tr><\/tbody><\/table>\n\n\n\nOriginal lamp \u2013<\/p>\n\n\n\n<\/noscript>T1 3\/4 Wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp;\nIncandescent; T-1 3\/4; Sub-Mini Wedge; 28V; 40mA; 0.3MSCP; 7000 Hrs <\/p>\n\n\n\nManufacturer\n#: 85 <\/p>\n\n\n\nAllied\nStock #: 70013004 <\/p>\n\n\n\nRecommended LED replacement lamp \u2013<\/strong><\/p>\n\n\n\n<\/noscript>T1 3\/4 LED wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp; LED; T-1 3\/4; Sub-Mini Wedge; White; 28V; 40mA; 0.3MSCP; Lamp life 30,000 hours.<\/p>\n\n\n\nManufacturer #: LED-24-T1.75 WEDGE-W Allied Stock #:<\/strong> 70012994 <\/p>\n\n\n\nThese LED lamps are more expensive but will last for almost 4 years compared to about 1 year for the regular tungsten lamps.<\/p>\n\n\n\n Mouser PN 560-LE-0509-01W is a white LED that would work for all of the switches and it costs less. Made by JKL Components https:\/\/www.mouser.com\/datasheet\/2\/208\/LE-0509-01-21680.pdf<\/a><\/p>\n\n\n\n<\/p>\n\n\n\nBonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Original lamp \u2013<\/p>\n\n\n\n<\/noscript>T1 3\/4 Wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp;\nIncandescent; T-1 3\/4; Sub-Mini Wedge; 28V; 40mA; 0.3MSCP; 7000 Hrs <\/p>\n\n\n\nManufacturer\n#: 85 <\/p>\n\n\n\nAllied\nStock #: 70013004 <\/p>\n\n\n\nRecommended LED replacement lamp \u2013<\/strong><\/p>\n\n\n\n<\/noscript>T1 3\/4 LED wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp; LED; T-1 3\/4; Sub-Mini Wedge; White; 28V; 40mA; 0.3MSCP; Lamp life 30,000 hours.<\/p>\n\n\n\nManufacturer #: LED-24-T1.75 WEDGE-W Allied Stock #:<\/strong> 70012994 <\/p>\n\n\n\nThese LED lamps are more expensive but will last for almost 4 years compared to about 1 year for the regular tungsten lamps.<\/p>\n\n\n\n Mouser PN 560-LE-0509-01W is a white LED that would work for all of the switches and it costs less. Made by JKL Components https:\/\/www.mouser.com\/datasheet\/2\/208\/LE-0509-01-21680.pdf<\/a><\/p>\n\n\n\n<\/p>\n\n\n\nBonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Lamp;\nIncandescent; T-1 3\/4; Sub-Mini Wedge; 28V; 40mA; 0.3MSCP; 7000 Hrs <\/p>\n\n\n\n
Manufacturer\n#: 85 <\/p>\n\n\n\n
Allied\nStock #: 70013004 <\/p>\n\n\n\n
Recommended LED replacement lamp \u2013<\/strong><\/p>\n\n\n\n<\/noscript>T1 3\/4 LED wedge lamp<\/figcaption><\/figure>\n\n\n\nLamp; LED; T-1 3\/4; Sub-Mini Wedge; White; 28V; 40mA; 0.3MSCP; Lamp life 30,000 hours.<\/p>\n\n\n\nManufacturer #: LED-24-T1.75 WEDGE-W Allied Stock #:<\/strong> 70012994 <\/p>\n\n\n\nThese LED lamps are more expensive but will last for almost 4 years compared to about 1 year for the regular tungsten lamps.<\/p>\n\n\n\n Mouser PN 560-LE-0509-01W is a white LED that would work for all of the switches and it costs less. Made by JKL Components https:\/\/www.mouser.com\/datasheet\/2\/208\/LE-0509-01-21680.pdf<\/a><\/p>\n\n\n\n<\/p>\n\n\n\nBonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Lamp; LED; T-1 3\/4; Sub-Mini Wedge; White; 28V; 40mA; 0.3MSCP; Lamp life 30,000 hours.<\/p>\n\n\n\n
Manufacturer #: LED-24-T1.75 WEDGE-W Allied Stock #:<\/strong> 70012994 <\/p>\n\n\n\nThese LED lamps are more expensive but will last for almost 4 years compared to about 1 year for the regular tungsten lamps.<\/p>\n\n\n\n Mouser PN 560-LE-0509-01W is a white LED that would work for all of the switches and it costs less. Made by JKL Components https:\/\/www.mouser.com\/datasheet\/2\/208\/LE-0509-01-21680.pdf<\/a><\/p>\n\n\n\n<\/p>\n\n\n\nBonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
These LED lamps are more expensive but will last for almost 4 years compared to about 1 year for the regular tungsten lamps.<\/p>\n\n\n\n
Mouser PN 560-LE-0509-01W is a white LED that would work for all of the switches and it costs less. Made by JKL Components https:\/\/www.mouser.com\/datasheet\/2\/208\/LE-0509-01-21680.pdf<\/a><\/p>\n\n\n\n<\/p>\n\n\n\nBonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/p>\n\n\n\n
Bonus – EMO box schematics are shown below<\/p>\n\n\n\n<\/noscript>32-005 EMO box<\/figcaption><\/figure>\n\n\n\n<\/noscript>EMO box<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
This post has the part number information for the switches and light bulbs for the EMO box used on PHI XPS and AES surface analysis systems. Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":2663,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","footnotes":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[164,162],"tags":[288,287],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?fit=756%2C756&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p2DEXo-GS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":962,"url":"https:\/\/www.rbdinstruments.com\/blog\/planned-power-outage-procedures-scanning-auger\/","url_meta":{"origin":2658,"position":0},"title":"Planned power outage procedures for scanning Auger","author":"Randy","date":"January 14, 2014","format":false,"excerpt":"This planned power outage procedure is written for a Physical Electronics (PHI) 600 scanning Auger system, but it applies to all older PHI systems including the 5000 series X-ray photoelectron spectrometers. At many companies and universities the facilities departments occasionally have planned power outages for maintenance purposes. The following procedures\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"scanning-auger-electronic-console","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2014\/01\/scanning-auger-electronics-console.png?fit=524%2C480&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1890,"url":"https:\/\/www.rbdinstruments.com\/blog\/v4-differential-valve-problem\/","url_meta":{"origin":2658,"position":1},"title":"V4 Differential Valve Problem","author":"Randy","date":"February 4, 2017","format":false,"excerpt":"V4 Differential Valve Problem This post describes how to fix the problem of the V4 differential valve not opening on an AVC when the DIFFY PUMP ION GUN button on the AVC remote box is depressed.\u00a0 Look at the photos at the bottom of the post for additional information. The\u2026","rel":"","context":"In "Operation and Calibration Procedures"","block_context":{"text":"Operation and Calibration Procedures","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/operation-and-calibration-procedures\/"},"img":{"alt_text":"clean_the_contacts","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2017\/02\/clean_the_contacts.jpg?fit=504%2C378&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1519,"url":"https:\/\/www.rbdinstruments.com\/blog\/660-scanning-auger-bake-out-procedure\/","url_meta":{"origin":2658,"position":2},"title":"660 Scanning Auger Bake-out procedure","author":"Randy","date":"June 15, 2015","format":false,"excerpt":"660 Scanning Auger Bake-out procedure. This procedure is written for the PHI 660 scanning Auger system but also works for the 600 scanning Auger systems as well. Ion pumps must be on and the system vacuum should be in the mid to low 10-7 range (or better).. Make sure that\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":406,"url":"https:\/\/www.rbdinstruments.com\/blog\/bake-out-procedure-to-improve-base-vacuum\/","url_meta":{"origin":2658,"position":3},"title":"PHI 5600 XPS system Bakeout procedure to improve base vacuum","author":"Randy","date":"August 30, 2019","format":"gallery","excerpt":"Updated 8-30-19 This post explains the bakeout procedure to improve base vacuum in a PHI 5600 X-ray photoelectron spectrometer. The procedure is basically the same for most of the older PHI (Physical Electronics) Spherical Capacitive Analyzer XPS surface analysis systems. PHI X-ray photoelectron spectrometers generally have built-in radiant heaters as\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"bakeout blankets on chamber","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2013\/04\/bakeout-blankets-on-chamber.jpg?fit=500%2C333&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2538,"url":"https:\/\/www.rbdinstruments.com\/blog\/avc-solenoid-replacement-procedure\/","url_meta":{"origin":2658,"position":4},"title":"AVC solenoid replacement procedure","author":"Randy","date":"June 9, 2019","format":false,"excerpt":"This procedure describes how to replace the solenoids in the Auto Valve Controller (AVC) used on Physical Electronics PHI surface analysis systems such as XPS Photo-electron and scanning Auger electron spectrometers. The AVC provides control of the pneumatic valves on the system by using 24V DC solenoids to route air\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"remove screw","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/06\/remove-screw.jpg?fit=972%2C648&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1548,"url":"https:\/\/www.rbdinstruments.com\/blog\/up-to-air\/","url_meta":{"origin":2658,"position":5},"title":"660 System up to air procedure","author":"Randy","date":"August 5, 2015","format":false,"excerpt":"Overview This procedure will allow you to safely bring the 660 scanning auger system up to air for maintenance. \u00a0 Shut down AugerMap and turn off the 20-610 electron gun control (filament down slowly) Also turn off the 20-622 gun control. Turn off the card rack power If V4 is\u2026","rel":"","context":"In "General Optics and Vacuum"","block_context":{"text":"General Optics and Vacuum","link":"https:\/\/www.rbdinstruments.com\/blog\/category\/general-optics-and-vacuum\/"},"img":{"alt_text":"phi-660-scanning-auger","src":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2015\/08\/SAM660.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658"}],"collection":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/comments?post=2658"}],"version-history":[{"count":3,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions"}],"predecessor-version":[{"id":3843,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/posts\/2658\/revisions\/3843"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media\/2663"}],"wp:attachment":[{"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/media?parent=2658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/categories?post=2658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rbdinstruments.com\/blog\/wp-json\/wp\/v2\/tags?post=2658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"32-005](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/32-005-schematic.jpg?resize=584%2C482&ssl=1\")
![\"EMO](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/plugins\/jquery-image-lazy-loading\/images\/grey.gif?resize=584%2C294&ssl=1\")
![\"EMO](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/EMO-box-schematic.jpg?resize=584%2C294&ssl=1\")
![\"EMO](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/emo-box.jpg?resize=584%2C611&ssl=1\")
![\"32-005](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/plugins\/jquery-image-lazy-loading\/images\/grey.gif?resize=584%2C585&ssl=1\")
![\"32-005](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/Bakeout-emo-box.jpg?resize=584%2C585&ssl=1\")
![\"EMO](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/plugins\/jquery-image-lazy-loading\/images\/grey.gif?resize=528%2C446&ssl=1\")
![\"EMO](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/EMO-switch.jpg?resize=528%2C446&ssl=1\")
![\"T1](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/plugins\/jquery-image-lazy-loading\/images\/grey.gif?resize=400%2C400&ssl=1\")
![\"T1](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/Tungsten-T1-34-24-V-AC-lamp.jpg?resize=400%2C400&ssl=1\")
![\"T1](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/uploads\/2019\/11\/LED-T1-34-24-V-AC-lamp.jpg?resize=400%2C400&ssl=1\")
![\"32-005](\"https:\/\/i0.wp.com\/www.rbdinstruments.com\/blog\/wp-content\/plugins\/jquery-image-lazy-loading\/images\/grey.gif?resize=584%2C482&ssl=1\")