A blog on the repair, operation and calibration of surface analysis systems and components including electron spectrometers, sputter ion guns and vacuum related hardware. Click on the Index tab below to see a list of all posts. Visit our website at http://www.rbdinstruments.com
RBD TechSpot Index of Posts
Index of all RBD TechSpot posts (sorted alphabetically):
[index_posts]
4 thoughts on “RBD TechSpot Index of Posts”
Hi Randy, I need some power requirements for PHI 50-096 X-ray source. We know it operates at 200-250V but we don’t know whether we need single phase or three phase and the amount of current it needs. Do you have any of these information? We really appreciate your help.
Hello Shuttha,
App PHI electronics use single phase voltage on the input. For the 50-096, here are the requirements – Input Power 200 to 250 Vac, single phase, 50 to 60 Hz, 15A.
Hello Don,
It is hard to find spline setscrews in larger sizes like 10-32. I did a quick search and found some that might work for you at System Sales Limited. Here is a link – 10/32 Spline set screw
Hi Randy, I need some power requirements for PHI 50-096 X-ray source. We know it operates at 200-250V but we don’t know whether we need single phase or three phase and the amount of current it needs. Do you have any of these information? We really appreciate your help.
Hello Shuttha,
App PHI electronics use single phase voltage on the input. For the 50-096, here are the requirements – Input Power 200 to 250 Vac, single phase, 50 to 60 Hz, 15A.
I am looking for 10-32 Nf setscrews with Bristol key sockets
Hello Don,
It is hard to find spline setscrews in larger sizes like 10-32. I did a quick search and found some that might work for you at System Sales Limited. Here is a link – 10/32 Spline set screw